Excellent nanocrystalline transformer core manufacturer 2022
Nanocrystalline toroidal core supplier with Transmart? Transmart Industrial Limited is an one stop solution provider for magnetic cores and chokes, supplying various magnetic cores in Nanocrystalline , Amorphous and Silicon steels, supplying soft magnetic materials, soft magnetic cores, toroidal transformer, nanocrystalline cores, toroidal core, electrical and electronic components as well as other materials for transformers and associated industries. Discover extra info at https://www.transmart.net/nanocrystalline-cores. As we focus on the improvement of the quality, this product has been manufactured with high quality and stable performance. It is of fine workmanship and good quality and is well sold in the domestic market. A positive market response indicates that the product has a good market prospect.
Since silicon steel has the above advantages, why not use the whole silicon steel as the iron core and process it into a sheet? This is because the sheet iron core can reduce another iron loss – “eddy current loss”. When the transformer works, there is alternating current in the coil, and the magnetic flux generated by it is of course alternating. This changing magnetic flux produces an induced current in the iron core. The induced current generated in the iron core flows in a ring in a plane perpendicular to the magnetic flux direction, so it is called eddy current. Eddy current losses also heat the core. In order to reduce the eddy current loss, the iron core of the transformer is stacked with silicon steel sheets insulated from each other, so that the eddy current passes through a small section in the narrow and long circuit, so as to increase the resistance on the eddy current path; At the same time, the silicon in silicon steel increases the resistivity of the material and reduces the eddy current.
As the iron core of the transformer, generally, 0.35mm thick cold rolled silicon steel sheet is selected. It is cut into long pieces according to the size of the required iron core, and then overlapped into “day” shape or “mouth” shape. In principle, in order to reduce eddy current, the thinner the silicon steel sheet, the narrower the spliced strip, and the better the effect. This not only reduces the eddy current loss and temperature rise, but also saves the material of silicon steel sheet. But in fact, when making silicon steel sheet iron core. Not only from the above favorable factors, because making the iron core in that way will greatly increase the working hours and reduce the effective section of the iron core. Therefore, when making transformer iron core with silicon steel sheet, we should start from the specific situation, weigh the advantages and disadvantages and choose the best size.
Transmart amorphous core manufacturer & supplier is mainly engaged in the production and sales of amorphous core materials. The amorphous core transformer is one of Transmart Industrial’s multiple product series.Transmart Industrial’s amorphous C-core is manufactured in strict accordance with relevant national standards. Every detail matters in the production. Strict cost control promotes the production of high-quality and priced-low product. Such a amorphous transformer is up to customers’ needs for a highly cost-effective product. See even more information on https://www.transmart.net/.
The annealing temperature of iron-based amorphous alloy is lower than that of silicon steel, and the energy consumption is small, and the iron-based amorphous alloy magnetic core is generally manufactured by special manufacturers. Silicon steel magnetic cores are generally manufactured by transformer manufacturers. According to the above comparison, as long as it reaches a certain production scale, iron-based amorphous alloy will replace some silicon steel markets in electronic transformers within the power frequency range. In the medium frequency range of 400Hz to 10kHz, even if new silicon steel varieties appear, iron-based amorphous alloy will still replace most silicon steel markets with a thickness of less than 0.15mm.
On the one hand, it can isolate eddy current, and the data is suitable for higher frequencies; On the other hand, due to the gap effect between particles, the data has low permeability and constant permeability; Because the particle size is small, there is basically no skin phenomenon, and the change of permeability with frequency is relatively stable; Moreover, the powder core can be prepared into special-shaped parts of various shapes for different fields; Finally, the damaged strip in industry can be crushed into magnetic powder, and then made into magnetic powder core, which can reduce the loss and improve the use value of data. The magnetoelectric properties of magnetic particle core mainly depend on the permeability of powder material, size and shape of powder, filling coefficient, content of insulating medium, forming pressure and heat treatment process.