Quality alloy wheels wholesale provider
Custom alloy wheels manufacturer and supplier in China? Misunderstanding : do not use the center ring (diameter ring) hub is a good hub. The center ring is called Hub-ring. there are mainly ABS and aluminum alloy. Here is a popular science about the origin and role of the center ring (reducer ring) : Why use the central sheath ring (reducer ring)? Due to the same hole distance (PCD) of different models of the center hole data is not the same, in order to save inventory, the majority of modified hub manufacturers will make the hub center hole data larger, to meet the needs of different models. When the hub center hole is larger than the shaft head, there will be a gap between the shaft head and the hub center hole. At this time, it is necessary to fill the gap between the center ring, to help the hub and the vehicle axle head closely. See more information at custom alloy wheels.
The two piece wheel consists of two parts: the rim (Barrel), and the wheel width. It is possible to combine different rim widths and thicknesses on one hub, or to combine widths and offsets for more options. And the two spokes are interchangeable, so that when repairing and replacing, it is not necessary to replace the whole hub, but only the part, which is finally fastened with high-strength bolts. This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.
One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.
Since pure electric vehicles do not need an engine, the design styles of the front hoods of pure electric vehicles can be diversified, and are generally refined and sharp. The design style of “rocket front” is full of sports, and it is very windy on the road. The functional configuration of pure electric vehicles Its strengths, various types of assisted safe driving, are very popular with novice drivers. Now many first-tier cities are gradually implementing limited numbers and licenses. Many people have money to buy cars, but the number 1 license is hard to get, but the green license is not affected. Electric hybrid models, which are the only choice for car owners in many restricted areas.
One piece forged wheels,Milling and forging,The use of impact or pressure to deform the metal between the upper and lower two against the iron (anvil) to obtain the required block of blanks, blanks after heat treatment and then through the machining center milling and forming, a piece of relatively lighter weight, can achieve the most lightweight dynamic balance better reliability, no hidden gas leakage. The main advantages of steel hubs are simple manufacturing process, relatively low cost and strong resistance to metal fatigue. But the disadvantages are also obvious, such as heavy weight, large inertial resistance, poor heat dissipation and so on.
We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of “low-pressure casting + spinning”. We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers’ needs and lead the industry development. The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating. Find additional details on https://www.jjjwheel.com/.