Do you have to repair your hot tub ?

Pro hot tub repair service in Colorado: Replace your insulated doors with screened louvered doors, which permit the shell and water to cool more quickly and also vents the heat from the running motors. (We do not advise leaving the doors open or off. The inside of a spa is not a safe place for children or pets, and you don’t want insects and rodents to get in).

Here are several tips about how to maintain your hot tub and also a suggestion if you live in Colorado. People with open sores or any type of infection should not use a spa. The hot water is the perfect environment for spreading infections, especially if sanitizer levels are not properly maintained. The same goes for rashes and other injuries. Consult a doctor to get the green light before stepping back into a hot tub. Newer spas have factory-set temperature maximums of 104 F. Most bathers find that 100 F to 102 F degrees is a comfortable and therapeutic level. Higher temperatures can place undue strain on the cardiovascular system. Be sure to accurately monitor the temperature. If you or your guests feel “funny”, lightheaded, or get overheated, step out of the tub. Check the temperature before returning and make sure you cool off and drink plenty of water.

Advices for buying a hot tub : Reclined seating lets you lay back, fully submerged in spa water. Loungers usually have more jets for a full-body massage. The best spas are deep enough to prevent you from floating out of the lounger. A lounge takes the equivalent space of up two standard seats. Tubs for families or friends the need more seats could skip the lounger for an extra spot.

One of the most important factors in deciding when to change your hot tub water is the level of Total Dissolved Solids (TDS)-a measure of everything soluble in your spa’s water. High TDS levels can indicate organic contamination and other problems. You can avoid doing full water changes by taking a page from aquarium enthusiasts and performing partial water changes at more frequent intervals than you would full ones. Rather than emptying your tub completely, remove a portion of your spa’s water, check the levels with a TDS meter , and adjust as necessary until your water is balanced and healthy. Low TDS levels make balancing your water chemistry much easier and help your sanitizers work more efficiently. Partial water changes are especially helpful in cold climates, where a full water change might not always be practical due to inclement weather or extreme temperatures.

Replace your spa filter every 1-2 years, again depending on usage. Another way to do it is to change it every 10-15 cleanings, because that’s what really breaks down a cartridge. Every time it’s cleaned, fibers loosen up and it loses a little bit of its dirt trapping ability. Keep track of your spa filter’s age and/or cleaning cycles, because at some point soon it’s gonna be “Hasta la vista, baby!” See extra info on Hot Tub Services and Repairs in Colorado.

But first let’s see the hot tub choice of the month : The Essential Rainier is a mid-ranged hot tub model that offers spacious comfort and luxury at an extremely attractive price. The 24 hydro jets offer a compelling hydrotherapy session that is sure to take away the stress and tiredness leaving you relaxed and comfortable. The ideal choice for customers looking for something that can easily accommodate a party of 4-6 people in relative comfort while being affordable and attainable. The Essential Rainier makes this possible by finding the right balance between luxury and practicality. For the price you will be hard pressed to find something of higher quality and capacity.

Your daily maintenance tasks are all about ensuring good water quality. In a hot tub that means checking two things: PH and sanitizer levels. This is easy stuff, and can generally be accomplished by dipping a single, color-coded test strip into the water to check that everything is as it should be. If you’re diligent about maintaining your tub, most days this won’t mean doing anything more than walking out to your tub, dipping the test stick in the water, and heading back inside. If your PH or sanitizer levels need adjusting, however, you’ll need take an extra few minutes to dump the proper additive into your water to get things back their proper levels. Doing so will prevent a host of problems, including scaling, mineral buildup, corrosion, skin irritation, and cloudy and stinky water. This spa care tip is so often forgotten. However, if the skimmer starts to suck air, it could possibly damage the pump. The water level should be in the middle of the skimmer intake or a little higher. You don’t want it too high, and you never want to overflow the spa, so keep a close eye on the water level while filling.